Please refer to our notes under Early Media support with Alcatel OmniPCX Enterprise (OXE) faulty. To what extent this option will allow progress tones (early media) will be available after ProCall Enterprise version 7.1, you will find here at this point or in the future release notes. Īlthough the option Allow Progress Tones (Early Media) is available in the line group on the Media tab, it is mandatory to deactivate it (no checkmark set): Takeover ername from username: activated (always checked).Īfter the SIP lines have been added to the line group, a unique name must still be entered for them.However, additional softphone lines can also be added later or created via file import. Configure more softphones: After pressing the Next > button, this dialog is displayed again for the purpose of specifying an additional SIP line.Password: the "password" as stored for the user name in the PBX,.Username(s): the specification of the SIP user name as stored in the PBX system,.To register specific SIP softphone lines on the Alcatel-Lucent OmniPCX Enterprise, provide the following information per line. However, increasing this value may be necessary to avoid blacklisting by the PBX for a large number of lines.
#ALCATEL PBX REGISTRATION#
If more than (in the order of) 25 SIP lines are to be registered, reducing the register delay of 600 ms is not recommended in order to achieve a better-distributed registration renewal. The other specifications Reregister after and Register delay are suitably preset but could be adjusted according to the total number of lines and the network topology. Example screenshot: UCServer Administration – Telephony – LinesĮnter Registrar/IP address and Port as registrar in the input line as they are configured in your PBX system. The settings are made in the UCServer administration: Setting up the telephone system connectionĮnter the connection to the PBX as "SIP softphone" with the type "Alcatel-Lucent – OmniPCX Enterprise (OXE)" under "Lines". The extensions in the PBX should be of the "SIP extension" set type and licensed accordingly.įor further details, please refer to the documentation of the telephone system regarding the connection of "3rd party SIP devices" to the telephone system. Only UDP connections are supported for the connection of SIP lines.įor the connection of SIP lines of the UCServer, the telephone system must support the codec G.711 a-law and should have this set as the preferred codec for all end devices.